Any Part. Any Machine. Any Job.

Your applications vary in shapes and sizes and so does Raptor. Our workholding products work independently or together. With Raptor, you’ll experience decreased set up time, higher yields and shorter cycle times!
  • Slide 1
  • Slide 2
  • Slide 3
RAPTOR IS FAST

RAPTOR IS FAST

Snap in your workpiece and hand-tighten the spring- loaded dovetail clamp. Unloading is just as easy.
RAPTOR IS SIMPLE

RAPTOR IS SIMPLE

A simple workpiece dovetail locks into the Raptor spring-loaded clamp. The connection is strong and secure.
Raptor is Strong

Raptor is Strong

Solid, super-strong stainless steel or lightweight aluminum ensures that Raptor will hold up to repeated use.
Raptor is Adaptable

Raptor is Adaptable

Raptor has adapters and risers that allow attachment to any machine you can think of. Yes, even that one.
  • RAPTOR IS FAST

    RAPTOR IS FAST

    Snap in your workpiece and hand-tighten the spring- loaded dovetail clamp. Unloading is just as easy.
  • RAPTOR IS SIMPLE

    RAPTOR IS SIMPLE

    A simple workpiece dovetail locks into the Raptor spring-loaded clamp. The connection is strong and secure.
  • Raptor is Strong

    Raptor is Strong

    Solid, super-strong stainless steel or lightweight aluminum ensures that Raptor will hold up to repeated use.
  • Raptor is Adaptable

    Raptor is Adaptable

    Raptor has adapters and risers that allow attachment to any machine you can think of. Yes, even that one.

    The fast and flexible workholding solution.

    Speed up your manufacturing by machining five full sides of the workpiece in one setup. Raptor's patented dovetail design quickly locks the part in place for extreme clamping strength and rigidity.

    An optional locating pin ensures your part is positioned accurately and, unlike other products, the spring-loaded clamp can be tightened with a simple hand wrench. Quick and easy.

    Raptor gets out of your way so you can get the job done.

    HAVE AN EDM APPLICATION?

    Use Raptor's Stainless Steel Dovetail Fixtures

    Our stainless steel fixtures and clamps are made from 17-4 stainless steel; Heat Treat: H-1150 / Rockwell Hardness Approximate 28.
    See all Stainless Steel Fixtures

    One-Step Setup

    Switch from a standard application to an EDM application in a single step: Simply substitute the clamping system socket head cap screws from alloy steel to stainless steel.
    Raptor Manufacturer Reps are an excellent resource in assisting you with choosing the best workholding solution for your application needs, provide onsite demonstrations & training.
     

    United States
    Canada & Mexico

    Please choose your state below to quickly locate your Raptor Manufacturer Representative & contact information.
     

    Pointer Sales, Inc.

    P.O. Box 1007
    Columbiana, AL, 35051

    Milton Pointer
    205-999-1957
    Fax: 205-669-1754

    This email address is being protected from spambots. You need JavaScript enabled to view it.


    Ken Hatfield
    205-365-8457

    This email address is being protected from spambots. You need JavaScript enabled to view it.

    Kirk Colburn
    205-999-0735

    This email address is being protected from spambots. You need JavaScript enabled to view it.


    Raptor Workholding Products

    901 N. Lake St.
    Burbank, CA, 91502

    800-824-8333

    This email address is being protected from spambots. You need JavaScript enabled to view it.


    Lake Street Tooling Solutions

    901 N. Lake St.
    Burbank, CA, 91502

    818-559-9550

    David Fisher
    This email address is being protected from spambots. You need JavaScript enabled to view it.




    Arkansasback to top

    Fuller & Associates

    P.O. Box 278
    Gunter, TX, 75058
     
    Terry Fuller
    281-785-7759

    This email address is being protected from spambots. You need JavaScript enabled to view it.

    Tim O'Roark
    903-718-0064

    This email address is being protected from spambots. You need JavaScript enabled to view it.


    Californiaback to top
    Northern California

    New Solutions Tooling

    Briones, CA, 94553

    Phil Peterson
    408-623-0375
    Fax: 925-458-1246

    This email address is being protected from spambots. You need JavaScript enabled to view it.


    Southern California

    Lake Street Tooling Solutions

    901 N. Lake St.
    Burbank, CA, 91502

    818-559-9550

    David Fisher
    This email address is being protected from spambots. You need JavaScript enabled to view it.




    Coloradoback to top

    Pro Tool & Machine Sales Co.

    2489 S. Eldridge Street
    Lakewood, CO 80228

    Jim Van Coevern
    303-887-6551
    Fax: 720-550-6572

    This email address is being protected from spambots. You need JavaScript enabled to view it.


    Connecticutback to top

    Walter K Coleman Co.

    45 Glenwood Drive
    North Kingstown, RI 02852

    Phil "Tab" Tabellario
    401-255-0399

    This email address is being protected from spambots. You need JavaScript enabled to view it.

    Delawareback to top

    TJ Toland & Associates

    105 Bridle Lane
    Lower Gwynedd, PA 19002
     
    Tom Toland
    267-481-0635

    This email address is being protected from spambots. You need JavaScript enabled to view it.


    Majority of state

    RAM Marketing & Sales

    13029 Sugar Creek Blvd.
    Hudson, FL, 34669

    Bob Marinelli
    727-856-6131
    Fax: 727-856-6638

    This email address is being protected from spambots. You need JavaScript enabled to view it.
     
    Fort Walton Beach Area 32548
     

    Pointer Sales

    1560 Highway 30.
    Columbiana, AL 35051

    Milton Pointer
    205-999-1957
    This email address is being protected from spambots. You need JavaScript enabled to view it. 


    Cutler Industrial Sales

    160 Irish Lane
    Islip Terrace, NY 11752

    Linda Buturla
    631-277-4930
    Cell: 978-204-6010

    This email address is being protected from spambots. You need JavaScript enabled to view it.

    Raptor Workholding Products

    901 N. Lake St.
    Burbank, CA, 91502

    800-824-8333

    This email address is being protected from spambots. You need JavaScript enabled to view it.


    New Solutions Tooling

    Briones, CA, 94553

    Phil Peterson
    408-623-0375
    Fax: 925-458-1246

    This email address is being protected from spambots. You need JavaScript enabled to view it.


    Illinoisback to top
    Northern Illinois

    D&L Sales

    801 Landmeier Road
    Elk Grove, IL, 60007

    Don Carlson
    708-897-8545
    Fax: 630-595-9517

    This email address is being protected from spambots. You need JavaScript enabled to view it.


    Steve Chiappe
    630-290-7602

    This email address is being protected from spambots. You need JavaScript enabled to view it.

    www.dlsales.com

    Southern Illinois

    Access Sales Associates

    5845 Horton
    Suite 107
    Mission, KS, 66202

    Brian Heil
    Cell: (913) 432-8266
    Office: (913) 205-8710

    This email address is being protected from spambots. You need JavaScript enabled to view it.


    Jim Doherty
    Cell: (785) 342-5008
    Office: (913) 432-8266

    This email address is being protected from spambots. You need JavaScript enabled to view it.
    Western & Southern Indiana

    Jack Dustman & Associates

    8401 Northwest Blvd, Suite A
    Indianapolis, IN 46278
     
    Greg Byington
    Cell: 317-590-5911

    This email address is being protected from spambots. You need JavaScript enabled to view it.
    Eastern & Northern Indiana

    Jack Dustman & Associates

    8401 Northwest Blvd, Suite A
    Indianapolis, IN 46278
     
    Matt Byington
    Cell: 317-439-4270

    This email address is being protected from spambots. You need JavaScript enabled to view it.


    Access Sales Associates, Inc.

    5845 Horton, Suite 107
    Mission, KS 66202

    Brian Heil
    Cell: (913) 432-8266
    Office: (913) 205-8710

    This email address is being protected from spambots. You need JavaScript enabled to view it.


    Jim Doherty
    Cell: (785) 342-5008
    Office: (913) 432-8266

    This email address is being protected from spambots. You need JavaScript enabled to view it.


    Access Sales Associates

    5845 Horton
    Suite 107
    Mission, KS, 66202

    Brian Heil
    Cell: (913) 432-8266
    Office: (913) 205-8710

    This email address is being protected from spambots. You need JavaScript enabled to view it.


    Jim Doherty
    Cell: (785) 342-5008
    Office: (913) 432-8266

    This email address is being protected from spambots. You need JavaScript enabled to view it.
    Kentuckyback to top

    Carlstrom Associates

    PO Box 211054
    Columbus OH 43221

    Dan Carlstrom
    Cell: 614-679-1924

    This email address is being protected from spambots. You need JavaScript enabled to view it.

     



    Louisianaback to top

    Fuller & Associates

    P.O. Box 278
    Gunter, TX, 75058

    Terry Fuller
    800-722-7078
    Fax: 877-429-3962

    This email address is being protected from spambots. You need JavaScript enabled to view it.

    Southern Louisiana
    Scott Evans
    832-830-4930
    Fax: 877-429-3962

    This email address is being protected from spambots. You need JavaScript enabled to view it.
    Northern Louisiana
    Tim O'Roark
    903-718-0064
    Fax: 877-429-3962

    This email address is being protected from spambots. You need JavaScript enabled to view it.


    Walter K Coleman Co.

    45 Glenwood Drive
    North Kingstown, RI 02852

    Phil "Tab" Tabellario
    401-255-0399

    This email address is being protected from spambots. You need JavaScript enabled to view it.

    Eric Meehan
    401-255-0402

    This email address is being protected from spambots. You need JavaScript enabled to view it.

    Marylandback to top

    TJ Toland & Associates

    105 Bridle Lane
    Lower Gwynedd, PA 19002
     
    Tom Toland
    267-481-0635

    This email address is being protected from spambots. You need JavaScript enabled to view it.


    Massachusettsback to top

    Walter K Coleman Co.

    45 Glenwood Drive
    North Kingstown, RI 02852

    Phil "Tab" Tabellario
    401-255-0399

    This email address is being protected from spambots. You need JavaScript enabled to view it.

    Michiganback to top

    H & N Associates

    111 N Glengary Road
    Bloomsfield Hills, MI 48439

    248-594-9945

    Don Noble
    Cell: 248-672-2223
    This email address is being protected from spambots. You need JavaScript enabled to view it.

    Eastern Michigan
    Randy Richardson
    Cell: 810-397-9469

    This email address is being protected from spambots. You need JavaScript enabled to view it.
    Western Michigan
    Ron Juros
    Cell: 269-512-4775

    This email address is being protected from spambots. You need JavaScript enabled to view it.



    Minnesotaback to top

    Braasch Industrial Sales

    Reid Swanson
    This email address is being protected from spambots. You need JavaScript enabled to view it.
    Phone: 612-281-7476

    Brad Dullinger
    This email address is being protected from spambots. You need JavaScript enabled to view it.
    Phone: 320-293-1266


    Mississippiback to top

    Pointer Sales, Inc.

    P.O. Box 1007
    Columbiana, AL, 35051

    Milton Pointer
    205-999-1957
    Fax: 205-669-1754

    This email address is being protected from spambots. You need JavaScript enabled to view it.


    Missouriback to top

    Access Sales Associates

    5845 Horton
    Suite 107
    Mission, KS, 66202


    Brian Heil
    Cell: (913) 432-8266
    Office: (913) 205-8710

    This email address is being protected from spambots. You need JavaScript enabled to view it.


    Jim Doherty
    Cell: (785) 342-5008
    Office: (913) 432-8266

    This email address is being protected from spambots. You need JavaScript enabled to view it.

    Raptor Workholding Products

    901 N. Lake St.
    Burbank, CA, 91502

    800-824-8333

    This email address is being protected from spambots. You need JavaScript enabled to view it.


    Nebraskaback to top

    Access Sales Associates

    5845 Horton
    Suite 107
    Mission, KS, 66202

    Brian Heil
    Cell: (913) 432-8266
    Office: (913) 205-8710

    This email address is being protected from spambots. You need JavaScript enabled to view it.


    Jim Doherty
    Cell: (785) 342-5008
    Office: (913) 432-8266

    This email address is being protected from spambots. You need JavaScript enabled to view it.
    Northern Nevada

    New Solutions Tooling

    Martinez, CA, 94553

    Phil Peterson
    408-623-0375
    Fax: 925-458-1246

    This email address is being protected from spambots. You need JavaScript enabled to view it.


    Southern Nevada

    Lake Street Tooling Solutions

    901 N. Lake St.
    Burbank, CA, 91502

    818-559-9550

    David Fisher
    This email address is being protected from spambots. You need JavaScript enabled to view it.




    New Hampshireback to top

    Walter K Coleman Co.

    45 Glenwood Drive
    North Kingstown, RI 02852

    Phil "Tab" Tabellario
    401-255-0399

    This email address is being protected from spambots. You need JavaScript enabled to view it.

    Eric Meehan
    401-255-0402

    This email address is being protected from spambots. You need JavaScript enabled to view it.
    New Jerseyback to top

    TJ Toland & Associates

    105 Bridle Lane
    Lower Gwynedd, PA 19002
     
    Tom Toland
    267-481-0635

    This email address is being protected from spambots. You need JavaScript enabled to view it.


    New Mexicoback to top

    Pro Tool & Machine Sales Co.

    2489 S. Eldridge Street
    Lakewood, CO 80228

    Jim Van Coevern
    303-887-6551
    Fax: 720-550-6572

    This email address is being protected from spambots. You need JavaScript enabled to view it.


    New Yorkback to top

    TJ Toland & Associates

    105 Bridle Lane
    Lower Gwynedd, PA 19002

    Tom Toland
    267-481-0635
    This email address is being protected from spambots. You need JavaScript enabled to view it.



    North Carolinaback to top

    Cutler Industrial Sales

    160 Irish Lane
    Islip Terrace, NY 11752

    John Hale
    631-277-4930
    Cell: 704-910-7287

    This email address is being protected from spambots. You need JavaScript enabled to view it.

    North Dakotaback to top

    Braasch Industrial Sales

    Reid Swanson
    This email address is being protected from spambots. You need JavaScript enabled to view it.
    Phone: 612-281-7476

    Brad Dullinger
    This email address is being protected from spambots. You need JavaScript enabled to view it.
    Phone: 320-293-1266


    Northern Ohio (Excluding the following counties: Lucas, Fulton, Wood, Ottawa)

    Carlstrom Associates

    PO Box 211054
    Columbus OH 43221

    Toby Carlstrom
    Cell: 614-679-1604

    This email address is being protected from spambots. You need JavaScript enabled to view it.

    Southern Ohio

    Carlstrom Associates

    PO Box 211054
    Columbus OH 43221

    Dan Carlstrom
    Cell: 614-679-1924

    This email address is being protected from spambots. You need JavaScript enabled to view it.



    Oklahomaback to top

    Fuller & Associates

    P.O. Box 278
    Gunter, TX, 75058

    Terry Fuller
    281-785-7759

    This email address is being protected from spambots. You need JavaScript enabled to view it.

    Tim O'Roark
    903-718-0064

    This email address is being protected from spambots. You need JavaScript enabled to view it.


    New Solutions Tooling Group

    Briones, CA, 94553

    Phil Peterson
    408-623-0375
    Fax: 925-458-1246

    This email address is being protected from spambots. You need JavaScript enabled to view it.


    Pennsylvaniaback to top
    Eastern Pennsylvania:

    TJ Toland & Associates

    105 Bridle Lane
    Lower Gwynedd, PA 19002
     
    Tom Toland
    267-481-0635

    This email address is being protected from spambots. You need JavaScript enabled to view it.
    Western Pennsylvania:

    Carlstrom Associates

    PO Box 211054
    Columbus OH 43221

    Toby Carlstrom
    Cell: 614-679-1604

    This email address is being protected from spambots. You need JavaScript enabled to view it.

    Pittsburg - Pennsylvania:

    Carlstrom Associates

    PO Box 211054
    Columbus OH 43221

    Dan Carlstrom
    Cell: 614-679-1924

    This email address is being protected from spambots. You need JavaScript enabled to view it.

    Rhode Islandback to top

    Walter K Coleman Co.

    45 Glenwood Drive
    North Kingstown, RI 02852

    Phil "Tab" Tabellario
    401-255-0399
    Fax: 401-942-0411

    This email address is being protected from spambots. You need JavaScript enabled to view it.

    South Carolinaback to top

    Cutler Industrial Sales

    160 Irish Lane
    Islip Terrace, NY 11752

    John Hale
    631-277-4930
    Cell: 704-910-7287

    This email address is being protected from spambots. You need JavaScript enabled to view it.

    South Dakotaback to top

    Braasch Industrial Sales

    Reid Swanson
    This email address is being protected from spambots. You need JavaScript enabled to view it.
    Phone: 612-281-7476

    Brad Dullinger
    This email address is being protected from spambots. You need JavaScript enabled to view it.
    Phone: 320-293-1266


    Tennesseeback to top
    Eastern Tennessee

    Cutler Industrial Sales

    160 Irish Lane
    Islip Terrace, NY 11752

    Linda Buturla
    631-277-4930
    Cell: 978-204-6010

    This email address is being protected from spambots. You need JavaScript enabled to view it.

    Western Tennessee

    Pointer Sales, Inc.

    P.O. Box 1007
    Columbiana, AL, 35051

    Milton Pointer
    205-999-1957
    Fax: 205-669-1754

    This email address is being protected from spambots. You need JavaScript enabled to view it.



    Fuller & Associates

    P.O. Box 278
    Gunter, TX, 75058

    Terry Fuller
    800-722-7078
    Fax: 877-429-3962

    This email address is being protected from spambots. You need JavaScript enabled to view it.

    Greater Houston
    Scott Evans
    832-830-4930
    Fax: 877-429-3962

    This email address is being protected from spambots. You need JavaScript enabled to view it.
    West & South Texas, Austin/San Antonio, Waco, Pan-Handle
    Kelly Gantt
    830-4011463
    Fax: 877-429-3962

    This email address is being protected from spambots. You need JavaScript enabled to view it.
    Dallas/Ft.Worth
    Tim O'Roark
    903-718-0064
    Fax: 877-429-3962

    This email address is being protected from spambots. You need JavaScript enabled to view it.



    Pro Tool & Machine Sales Co.

    2489 S. Eldridge Street
    Lakewood, CO 80228

    Jim Van Coevern
    303-887-6551
    Fax: 720-550-6572

    This email address is being protected from spambots. You need JavaScript enabled to view it.


    Walter K Coleman Co.

    45 Glenwood Drive
    North Kingstown, RI 02852

    Eric Meehan
    401-255-0402

    This email address is being protected from spambots. You need JavaScript enabled to view it.

    Virginiaback to top

    Cutler Industrial Sales

    160 Irish Lane
    Islip Terrace, NY 11752

    John Hale
    631-277-4930
    Cell: 704-910-7287

    This email address is being protected from spambots. You need JavaScript enabled to view it.

    Washingtonback to top

    New Solutions Tooling Group

    Briones, CA, 94553

    Phil Peterson
    408-623-0375
    Fax: 925-458-1246

    This email address is being protected from spambots. You need JavaScript enabled to view it.


    West Virginiaback to top

    Carlstrom Associates

    PO Box 211054
    Columbus OH 43221

    Dan Carlstrom
    Cell: 614-679-1924

    This email address is being protected from spambots. You need JavaScript enabled to view it.

    330-962-4980

    Wisconsinback to top

    D&L Sales

    310 Meyer Road
    Bensenville, IL, 60106

    Steve Chiappe
    630-595-9240
    Fax: 630-595-9517

    This email address is being protected from spambots. You need JavaScript enabled to view it.
    www.dlsales.com

    Raptor Workholding Products

    901 N. Lake St.
    Burbank, CA, 91502

    800-824-8333
    Fax: 727-856-6638

    This email address is being protected from spambots. You need JavaScript enabled to view it.
    RaptorWorkholding.com

    British Columbia

    New Solutions Tooling

    Briones, CA, 94553

    Phil Peterson
    408-623-0375
    Fax: 925-458-1246

    This email address is being protected from spambots. You need JavaScript enabled to view it.

     
    Quebec

    Carlstrom Associates

    PO Box 211054
    Columbus OH 43221

    Dan Carlstrom
    Cell: 614-679-1924

    This email address is being protected from spambots. You need JavaScript enabled to view it.

     
    Ontario - east of Windsor

    Carlstrom Associates LLC

    PO Box 211054
    Columbus, Oh 43221

    Dan Carlstrom
    614-679-1924

    This email address is being protected from spambots. You need JavaScript enabled to view it.

    Ontario - City of Windsor only

    H & N Associates

    111 N Glengary Road
    Bloomsfield Hills, MI 48439

    248-594-9945

    Don Noble
    Cell: 248-672-2223
    This email address is being protected from spambots. You need JavaScript enabled to view it.

     

    Samuel D. Duran

    (55) 5343 3675 Cell: (55) 6347 2745

    This email address is being protected from spambots. You need JavaScript enabled to view it.

     

    From start to finish, Raptor and Esprit Cam get the job done!
    Raptor Dovetail Fixture RWP-001
    #raptorworkholding #espritcam #makingchips720 #5axis #machining #machinist #workholdingsolutions #workholding #cnc
    Customize to fit your application!
    The Piranha Cooling Line is a unique and versatile system for precise coolant supply made in 1/8,1/4, ½” sizes. Made of high-strength anodized aluminum, it withstands pressures of up to 80 bar and can be ...
    Tiny but mighty! Raptor 3/4” Dovetail Fixture: RWP-003
    Check out our website for all 3/4” options:
    https://www.raptorworkholding.com/5-axis-fixtures/dovetail-5-axis-fixtures/0-75-dovetail-fixtures
    Thanks @spellmanmachine for the post!
    #repost #raptorworkholding #makingchips720 #5axis #machinist #cnc #workholdingsloutions
    Esprit Cam showing off a sweet production at Knox Machinery’s open house today. How about that Dovetail Fixture? Raptor helps make it happen!
    Posted @withrepost • @espritcam You know what they say ... #clearanceisclearance #espritcam @raptorworkholding .
    .
    .
    #cnc ...
    The Piranha Zero Point Vise System is unique in the market by offering 2 different types of vise systems. The Snapper vise utilizes serrated jaws with 3mm of clamping depth and 8,000 lbs of clamping force used for holding castings. ...
    More sunlight or sleep, which do you prefer?
    I think I can speak for all of us here at Raptor when I say that we are proud to work for our President, Rich Porter. He has recently taken over the role of The James Foundation Board chair and ...
    We are loving this positive feedback! Thank you @nutted_it_machining!
    #raptorlove #raptorworkholding #makingchips720 #cnc #5axis #5axismachining #machinist
    Posted @withrepost • @nutted_it_machining More raptor fixtures. Great way of holding on, to be able to machine all the way around your parts! 24 ...
    Seeing double! Looks to be a tough part indeed @nutted_it_machining
    Hope the Raptor fixtures helped with the task.
    #repost #raptorworkholding #5axis #machinist #cnc #workholdingsolutions #workholding #makingchips720
    www.raptorworkholding.com
    Both lines of Piranha’s Self Centering Gepard and Snapper Vises will work with their Zero Point System and Risers.
    #piranhaclamp #tecoworkholding #workholdingsolutions #machinist #cnc #zeropoint #selfcenteringvise
    Piranha’s 1/4” coolant delivery system with a 20mm nozzle. Piranha provides up to 1100 psi of pressure, as well as, efficiently directing your coolant to the critical cutting/grinding zones.
    #piranhacooling #raptorworkholding #tecoworkholding #machinist #cnc #workholdingsolutions #makingchips720 #5axismachining #workholding
    @saklax thanks for sharing this awesome part on our workholding!
    Raptor Dovetail Fixture RWP-006SS
    Raptor 3.5” Riser
    #repost #raptorworkholding #workholding #workholdingsolutions #cnc #machinist #5axis #makingchips720
    Raise Awareness!
    Dress in BLUE tomorrow for National Colorectal Cancer Awareness Month.💙
    We come across some pretty amazing parts, but how cool is this matchbox car?
    #readyforthetrack
    Raptor Dovetail Fixture RWP-001SS
    Raptor Assembly -The Mini Tombstone
    RWP-019-4X90T
    #raptorworkholding #makingchips720 #workholding #workholdingsolutions #5axis #machinist #5axismachining
    Raptor Dovetail Fixture, RWP-001
    Raptor Adapter, RWP-203
    Adapters enable compatible fixtures to be mounted on any machine. Check out the variety of adapters, risers, and fixtures we offer:
    https://www.raptorworkholding.com/
    #raptorworkholding #makingchips720 #machinist #5axismachining #5axis #workholding #workholdingsolutions
    Looking good @marquezmonster!
    #repost #raptorworkholding #5axis #makingchips720
    Raptor Dovetail Fixture RWP-002 and Riser RWP-203
    VMR1 Competition Racing - Raptor Working Holding Thanks to having amazing customers! Our buddies at WMR Competition Performance put together this video for us. Thank you for your support guys. Having great customers like you is what keeps us motivated! Check out their links below.
    www.WMR1.com
    Instagram: ...
    Raptor Pinch Block Check out how to use Raptor's Pinch blocks for a quick workholding solution for secondary and final operations. 5 axis workholding - Soft jaws for your Dovetail fixtures.
    http://raptorworkholding.com/5-axis-fixtures/pinch-blocks
    5-AXIS SELF CENTERING VISE - RAPTOR Hey guys!
    We're looking forward to seeing you at IMTS 2016! Come check out our brand new, interchangeable jaw, 5-axis self centering vise. Booth W-1556.
    WIN A DOVETAIL FIXTURE: JUNE CONTEST '16 Hi Everyone! If you're not already following us on Instagram or Facebook please do for a chance to win a FREE RAPTOR DOVETAIL FIXTURE! All you need to do is post and share a photo of your parts running on ...
    Getting The Most From Your 5 Axis - Multi-Fixtures Awesome video by Tim Paul of Autodesk, Inc. using Raptor's multi-fixture nest RWP-003-4X in the MX-520.
    PRODUCTS:
    Adapter Plate/ Riser: RWP-234 (Direct connect to the 300mm pallet)
    Multi Fixture: RWP-003-4X
    LINKS:
    http://raptorworkholding.com/view/productdetails/virtuemart_product_id/96/virtuemart_category_id/7.html
    http://raptorworkholding.com/rwp-003-4x.html
    http://www.autodesk.com/
    How to use Raptor Workholding - Training: 1 This video was created for training purposes on Raptor Workholding products.
    For questions please feel free to contact
    Sarah Selva: National Sales Manager
    Sarah@RaptorWorkholding.com
    (818) 841-1785
    Workholding Tips for your Haas Indexer COMING SOON: Watch as Hauck Engineering uses Raptor's brand new adapter to do some aggressive 4 axis machining. This new adapter is a direct mount to your HA5C allowing you to attach it right onto your indexer and get to ...
    Raptor Workholding Products See how Raptor's Dovetail fixtures work on our new video!

    Load More

    From start to finish, Raptor and Esprit Cam get the job done!
    Raptor Dovetail Fixture RWP-001
    #raptorworkholding #espritcam #makingchips720 #5axis #machining #machinist #workholdingsolutions #workholding #cnc
    Customize to fit your application!
    The Piranha Cooling Line is a unique and versatile system for precise coolant supply made in 1/8,1/4, ½” sizes. Made of high-strength anodized aluminum, it withstands pressures of up to 80 bar and can be ...
    Tiny but mighty! Raptor 3/4” Dovetail Fixture: RWP-003
    Check out our website for all 3/4” options:
    https://www.raptorworkholding.com/5-axis-fixtures/dovetail-5-axis-fixtures/0-75-dovetail-fixtures
    Thanks @spellmanmachine for the post!
    #repost #raptorworkholding #makingchips720 #5axis #machinist #cnc #workholdingsloutions
    Esprit Cam showing off a sweet production at Knox Machinery’s open house today. How about that Dovetail Fixture? Raptor helps make it happen!
    Posted @withrepost • @espritcam You know what they say ... #clearanceisclearance #espritcam @raptorworkholding .
    .
    .
    #cnc ...
    VMR1 Competition Racing - Raptor Working Holding Thanks to having amazing customers! Our buddies at WMR Competition Performance put together this video for us. Thank you for your support guys. Having great customers like you is what keeps us motivated! Check out their links below.
    www.WMR1.com
    Instagram: ...
    Raptor Pinch Block Check out how to use Raptor's Pinch blocks for a quick workholding solution for secondary and final operations. 5 axis workholding - Soft jaws for your Dovetail fixtures.
    http://raptorworkholding.com/5-axis-fixtures/pinch-blocks

    Load More

    Watch Raptor Workholding on Titans of CNC

    Season 3 available to view on: