RWP-003-4X

Raptor Nest 4 RWP-003 Dovetail Fixtures 3.8″ Dia. BC

$3,750.70

SKU: RWP-003-4X Categories: ,
Min Workpiece Size (L x W x H in.) 1.30 x 1.30 x 0.50
Max Workpiece Size (L x W x H in.) 3.00 x 3.00 x 3.00
Max Workpiece Weight lb. 3.00
Weight 12.0000 oz
Dimensions 12.0000 × 12.0000 × 8.0000 in
Compatible With RWP-003
Dovetail Width in. 0.750
Fixture Swing Diameter 7.135
Fixture Height in. 3.327
Fixture Diameter in. 4.970
Bolt Circle Diameter in. 3.800
Boss in. 1.250 Dia x 0.25 Boss

Description

  • Description
  • Instructions & Guidelines
  • Key Dimensions
  • Included
  • Technical Files
  • Related Products

7075-T6511 Aluminum 0.75″ Dovetail Multi-Fixture

The Pyramid body utilizes four RWP-003 dovetail fixtures. This fixture is designed specifically for five-axis machining applications and allows you to hold four workpieces at the same time. This fixture mounts to Raptor risers with Raptor Interface mounting.

The Pyramid Body is manufactured from 7075-T6511 aluminum.

Patented Design. Patent US8,672,310 B2

0.75 Dovetail Preparation Specifications
  • Fixtures must be bolted down firmly to your Pallet or Table using the screws provided.
  • Do not alter or replace any screw, spring or clamp with anything other than the exact item provided.
  • Clamps must be tightened between 120 and 175 inch pounds of torque. DO NOT EXCEED 175 Inch Pounds.While for most applications tightening can be accomplished simply by using the T-Handle wrench provided, it is always recommended that a torque wrench be used until you establish the proper torque pressure for your application. Depending on the size of your workpiece and the material being cut you may need to adjust your clamping pressure. It is never recommended to under or over torque the clamps as this will lead to clamp or fixture failure.
  • When machining your workpiece with the dovetail it is critical that you follow our sketches. Failure to do so may result in the workpiece coming loose and or damage to your fixture. Pay close attention to required sizes and radius requirements on the sketches.
  • Failure to follow these instructions may result in injury or damage to your workpiece, tools, fixtures and/or machine.

Raptor technical files are free for use of our valued customers. By creating an account or using these files, you agree to the Solid Model License and Privacy Policy.