Warranty

LIMITED WARRANTY:

Raptor Workholding Products, hereafter referred to as “RWP”, provides a limited warranty. The term “Product” will refer to the item(s) that you purchased from RWP.

This Limited Warranty extends only to the original purchaser.

RWP warrants this product and its parts against defects in materials or workmanship for one years labor and 90 days parts from the original date of invoice. During this period, RWP will repair or replace defective parts with new or reconditioned parts at RWP option, without charge to you. All original parts replaced by RWP become the property of RWP. You are responsible for the payment, at current rates, for any service or repair outside the scope of this limited warranty.

RWP offers a 30 day no-questions-asked return policy. If you are not satisfied with the product – return it for a full refund.*
RWP offers a 1 year warranty for parts.* 1 year warranty does not apply to dovetail cutters.

RWP, makes no other warranty, either express or implied, including but not limited to an implied warranties of merchantability, fitness for a particular purpose, or conformity to any representation or description, with respect to this product other than as set forth below.

Except as provided below, RWP is not liable for any loss, cost, expense, inconvenience or damage that may result from use or inability to use the product. Under no circumstances shall RWP be liable for any loss, cost, expense, inconvenience or damage exceeding the purchase price of the product.

The warranty and remedies set forth below are exclusive and in lieu of all others, oral or written, expressed or implied. No reseller, agent or employee is authorized to make any modification, extension or addition to this warranty.

Warranty Conditions

The above Limited Warranty is subject to the following conditions:

  1. This warranty extends only to products distributed by RWP, or its authorized agents, is effective only if the products are purchased and operated in the USA. (Within the USA including US 48 States, Alaska and Hawaii.)
  2. This warranty covers only normal use of the product. RWP shall not be liable under this warranty if any damage or defect results from (i) misuse, abuse, neglect, improper shipping or installation; (ii) disasters such as fire, flood, lightning or improper electric current; or (iii) service or alteration by anyone other than an authorized RWP representative.
  3. In the event that your product is returned to RWP for repair – should no defect in materials or workmanship is found, you will be responsible for return shipping and current labor charges.
  4. You must retain your bill of sale or other proof of purchase to receive warranty service.
  5. No warranty extension will be granted for any replacement part(s) furnished to the purchaser in fulfillment of this warranty.
  6. *You will be responsible to pay all shipping charges associated with the return or repair. Products being returned to RWP must not be damaged and shall only display normal wear and tear, otherwise this warranty is void.
  • Sunday, 08 July 2012
One last delicious meal in New England to celebrate our week at Eastec! It’s been a successful and fun trip. Back home to good old Ohio tomorrow!
#eastec2019 #raptorworkholding
Day 1 of Eastec!
Stop and see us - Booth # 5463!
#raptorworkholding #eastec #eastec2019
Some delicious German food at The Student Prince for dinner tonight. Getting ready for Eastec tomorrow!
How’s this for efficiency?!
Four parts are being machined with one set up using Raptor’s multi-fixture, RWP-019-4X45T. This pyramid will mount to the following Dovetail Fixtures: RWP-001(SS), RWP-004, RWP-013(SS), RWP-026
www.raptorworkholding.com
Thanks for the shout out @brappinbrian!
#repost #raptorworkholding #makingchips720 ...
Stop and see us st Eastec next week! Booth #5463
Discover all things Raptor, Piranha, and TE-CO!
#workholdingsolutions
#raptorworkholding
#piranhaclamp
#piranhacooling
#makingchips720 #cnc #machinist #5axis #5axismachining
Happy Teacher Appreciation Week!
#raptorworkholding
How many hours is your spindle turning? Raptor can help you achieve around the clock manufacturing. Check our site for all available Dovetail Fixtures and Cutters, Adapters and Risers.
www.raptorworkholding.com
#5axismachining #raptorworkholding #makingchips720 #5axis #workholdingsolutions #madeintheusa #machinist #cnc
Happy Monday!
Perhaps another cup...?
Service awards were handed out at our 1st quarter productivity meeting yesterday. Pictured left to right are Rodney Lemaster (5 years), Jessica Lavy (HR Manager), Cynthia Hoover (25 years), Steve Drew (20 years), Dan Parks (15 years), and Wyatt Fenton ...
@carolina_cncman putting his Raptor Dovetail Fixture to good use here!! Awesome work! Thanks for the shout out!
#repost #workholdingsolutions #cnc #5axis #raptorworkholding #makingchips720
Milton Union had a successful Career Day today with a lot of booths and presenters from local companies. There was a fair amount of students who already know the field they are planning to go into. For those students who ...
We will be attending Eastec 2019 in two weeks! Please stop by booth # 5463 and check out the workholding solutions we have to offer!
#raptorworkholding #piranhaclamp #piranhacooling
Dale Shields, one of our regional sales reps, attended the Matsuura Machinery spring open house this week and had the opportunity to explain machining multiple parts with one workholding setup. One of the highlights, for us, was seeing our products ...
Piranha’s high strength, anodized aluminum cooling line fits on standard tool holders and withstands pressures up to 80 bar.
We have starter kits in 1/8”, 1/4”, and 1/2” in stock!
#piranhacooling #raptorworkholding #workholdingsolutions #machinist #cnc
Raptor Dovetail Cutters
All Raptor Dovetail Fixtures are attached to the workpiece using the same simple dovetail. Setup is quick, easy and the same for every part and only requires 1/8” of material to hold the workpiece. Less waste, easy ...
Learn how to machine multiple parts with a single workholding solution.
Raptor seminar at Noon!
#raptorworkholding #matsuura #cnc #makingchips720 #machinist #workholdingsolutions
Happy Earth Day!
Happy Easter!
Look what Raptor can help you do!! RWP-001SS
1.5”Dovetail Fixture
Thanks @espritcam for the video.
Visit our website for more info:
www.raptorworkholding.com
#repost #raptorworkholding #madeintheusa #makingchips720 #5axis #machinist #cnc #workholdingsolutions
Someone’s saving some time this week with help from Raptor products. Thanks for sharing @jaume_balu
#repost #raptorworkholding #makingchips720 #workholdingsolutions #cnc #5axis #machinist
VMR1 Competition Racing - Raptor Working Holding Thanks to having amazing customers! Our buddies at WMR Competition Performance put together this video for us. Thank you for your support guys. Having great customers like you is what keeps us motivated! Check out their links below.
www.WMR1.com
Instagram: ...
Raptor Pinch Block Check out how to use Raptor's Pinch blocks for a quick workholding solution for secondary and final operations. 5 axis workholding - Soft jaws for your Dovetail fixtures.
http://raptorworkholding.com/5-axis-fixtures/pinch-blocks
5-AXIS SELF CENTERING VISE - RAPTOR Hey guys!
We're looking forward to seeing you at IMTS 2016! Come check out our brand new, interchangeable jaw, 5-axis self centering vise. Booth W-1556.
WIN A DOVETAIL FIXTURE: JUNE CONTEST '16 Hi Everyone! If you're not already following us on Instagram or Facebook please do for a chance to win a FREE RAPTOR DOVETAIL FIXTURE! All you need to do is post and share a photo of your parts running on ...
Getting The Most From Your 5 Axis - Multi-Fixtures Awesome video by Tim Paul of Autodesk, Inc. using Raptor's multi-fixture nest RWP-003-4X in the MX-520.
PRODUCTS:
Adapter Plate/ Riser: RWP-234 (Direct connect to the 300mm pallet)
Multi Fixture: RWP-003-4X
LINKS:
http://raptorworkholding.com/view/productdetails/virtuemart_product_id/96/virtuemart_category_id/7.html
http://raptorworkholding.com/rwp-003-4x.html
http://www.autodesk.com/
How to use Raptor Workholding - Training: 1 This video was created for training purposes on Raptor Workholding products.
For questions please feel free to contact
Sarah Selva: National Sales Manager
Sarah@RaptorWorkholding.com
(818) 841-1785
Workholding Tips for your Haas Indexer COMING SOON: Watch as Hauck Engineering uses Raptor's brand new adapter to do some aggressive 4 axis machining. This new adapter is a direct mount to your HA5C allowing you to attach it right onto your indexer and get to ...
Raptor Workholding Products See how Raptor's Dovetail fixtures work on our new video!

Load More

One last delicious meal in New England to celebrate our week at Eastec! It’s been a successful and fun trip. Back home to good old Ohio tomorrow!
#eastec2019 #raptorworkholding
Day 1 of Eastec!
Stop and see us - Booth # 5463!
#raptorworkholding #eastec #eastec2019
Some delicious German food at The Student Prince for dinner tonight. Getting ready for Eastec tomorrow!
How’s this for efficiency?!
Four parts are being machined with one set up using Raptor’s multi-fixture, RWP-019-4X45T. This pyramid will mount to the following Dovetail Fixtures: RWP-001(SS), RWP-004, RWP-013(SS), RWP-026
www.raptorworkholding.com
Thanks for the shout out @brappinbrian!
#repost #raptorworkholding #makingchips720 ...
Stop and see us st Eastec next week! Booth #5463
Discover all things Raptor, Piranha, and TE-CO!
#workholdingsolutions
#raptorworkholding
#piranhaclamp
#piranhacooling
#makingchips720 #cnc #machinist #5axis #5axismachining
Happy Teacher Appreciation Week!
#raptorworkholding
VMR1 Competition Racing - Raptor Working Holding Thanks to having amazing customers! Our buddies at WMR Competition Performance put together this video for us. Thank you for your support guys. Having great customers like you is what keeps us motivated! Check out their links below.
www.WMR1.com
Instagram: ...
Raptor Pinch Block Check out how to use Raptor's Pinch blocks for a quick workholding solution for secondary and final operations. 5 axis workholding - Soft jaws for your Dovetail fixtures.
http://raptorworkholding.com/5-axis-fixtures/pinch-blocks

Load More