Additional Images
Click to Enlarge
rwp_009ss_4dc87edab1ff62
rwp-009-key-dimensions7
281x045-prep4

RWP-009SS Discontinued

Stainless Steel 0.281" Width
0.0469" Height Dovetail Fixture
Discontinued
Variant price modifier:
Sales price $789.70
Raptor products are available only through local distributors. To locate your local Distributor click on the "Buy Raptor Products" tab.

Find a Raptor Distributor
In Stock

Dovetail Width 0.281in
Dovetail Height 0.0469in
Max Workpiece Weight 0.284  Pounds
Max Workpiece Width 1.25 In
Max Workpiece Length 1.25 In
Max Workpiece Height 1.25 In
Fixture Material Stainless Steel
Number of Clamps 1 Clamp
Clamp Part Number RWP-CL304SQ
Fixture Height 1.563in

Description
Instructions & Guidelines
Basic Dimensions
Related Products

Attention: This fixture has been discontinued and is available in limited quantities.
We encourage you to purchase our improved, even stronger RWP-032SS Micro-Fixture.

The RWP-009SS is a .281" wide dovetail holder for milling applications. This product has a dovetail height of 0.0469". The RWP-009SS is designed to connect to your machine using the four mounting holes.

The RWP-009SS is manufactured from 17-4 Heat Treated Stainless Steel.

The fixture clamp is made from 17-4 Stainless Steel.

Raptor Dovetail Fixtures are made to hold your part on four and five-axis CNC machines. The fixtures provide rigid clamping while exposing five faces of the workpiece. Most features can be completed in a single operation. Our unique Raptor Dovetail spring-loaded clamps require only .0469" of material to hold the workpiece. That means less waste, easier prep and no distortion. You prepare all your parts with a single dovetail and utilize the same fixture for every part. Easy, strong and efficient.

Patented Design. Patent US8,672,310 B2

Download 0.281" x 0.0469" Dovetail Prep Drawing (pdf)
Dovetail Prep Troubleshooting (pdf)
Proper Dovetail Geometry (pdf)

  • Fixtures must be bolted down firmly to your Pallet or Table using the screws provided.
  • Do not alter or replace any screw, spring or clamp with anything other than the exact item provided.
  • Clamps must be tightened between 30 and 40 inch pounds of torque. DO NOT EXCEED 40 Inch Pounds. While for most applications tightening can be accomplished simply by using the T-Handle wrench provided, it is always recommended that a torque wrench be used until you establish the proper torque pressure for your application. Depending on the size of your workpiece and the material being cut you may need to adjust your clamping pressure. It is never recommended to under or over torque the clamps as this will lead to clamp or fixture failure.
  • When machining your workpiece with the dovetail it is critical that you follow our sketches. Failure to do so may result in the workpiece coming loose and or damage to your fixture. Pay close attention to required sizes and radius requirements on the sketches.
  • Failure to follow these instructions may result in injury or damage to your workpiece, tools, fixtures and/or machine.

Disclaimer:

Due to the size of the Micro-fixture product, please note that this product is recommended for use with a workpiece size that is small and light weight; production runs that are smaller volume; and preferably for conservative / slower machining.

We recommend the RWP-019SS as an upgrade product if your workpiece size & weight are pushing our recommendations and if your production runs are larger in scale.

Piranha coolant line video! Check it out!
In honor of National Love Your Pet Day we wanted to share some animals of the office staff! ❤️
Our VP of sales Ray, Enjoying a lovely evening in Switzerland having dinner with Raphael and Daniela our awesome  business partners from Piranha  Clamp!
RWP-1051 standard parallel (1/8 ledge) for the RWP-502 vise!
•provides precise straight edge for clamping machines workpiece
•good for light/medium duty machining
•rail provides maximum support while allowing clearance on bottom of workpiece
•hardened and ground steel
•sold individually
RWP-1050 Serrated 45 degree dovetail which fits the RWP-502!
•use as a dovetail clamp or serrated edge clamp
•utilizes dovetail form for secure clamping and retention
•bite height =.110
•dovetail width can be modified to fit different workpiece sizes
•it ...
RWP-502 100mm Self centering vise!
*all steel construction
*automatically positions workpiece in center of vise
*centering tolerance is +/-0.013 (0.0005)
*repeatability is 0.001
*jaw clamping range is 0-2.500 as shown and 2.500-5.620 with jaws reversed!
*jaw insert options available for ...
Piranha cooling line solves all cooling problems on chip-removing processing!
*withstands pressure up to 80 bar *long lifespan thanks to anodized coating
*fits on all standard tool holders
* available in 1/8, 1/4 and 1/2 inch
*Call us for more ...
The first picture shows a RWP-203 adapter with a RWP-002SS mounted to it with raw material on top. The second picture then shows what used to be raw material in its final phase with all 5 sides machined!
On Tuesday TE-CO hosted its annual chili cook off! There were 7 different pots in the competition! Employees tested each pot and voted on the one they liked best!
Cynthia Hoover pot 5 was our winner! Congratulations Cynthia!
Piranha has two new 75mm vises to offer!
*the one on left is a zero point mounting system
*the one on the right is a direct mount
Give us a call today for pricing and more information!
Thanks to Visoneering for the opportunity to see Raptor in action!
The RWP-001 fixture on multiple applications and running 20 hours a day!
The wall of Hurco!
We love working with the aerospace projects and seeing the outcome!

Load More

Watch Raptor Workholding on Titans of CNC

Season 3 available to view on: