Additional Images
Click to Enlarge


Aluminum 0.75" Dovetail
2 In-Line Bridge System
Variant price modifier:
Sales price $1,158.58
Raptor products are available only through local distributors. To locate your local Distributor click on the "Buy Raptor Products" tab.

Find a Raptor Distributor
In Stock

For Fixture RWP-024, RWP-024SS
Connects to Any Machine

Dovetail Width 0.750in
Dovetail Height .125in
Max Workpiece Weight 16  Pounds
Max Workpiece Width 4.00 In
Max Workpiece Length 8.50 In
Max Workpiece Height 4.00 In
Fixture Material Aluminum
Number of Clamps 2 Clamps
Clamp Part Number RWP-CL302SQ

Instructions & Guidelines
Basic Dimensions
Related Products
The RWP-024-2XR is a 0.75" dovetail bridge system for milling applications. This product is designed for modular applications: utilizing two RWP-024 fixtures in-line to hold longer parts.

The versatility of this fixture allows you to either hold two workpieces weighing 8 pounds and size (L x W x H)  2.0" x 2.0" x 2.0"  or 1 long workpiece weighing up to 16 pounds and size (L x W x H) 8.5" x 4.0" x 4.0".

The components of the RWP-024-3XR (each RWP-024 and base unit) are manufactured from Aluminum 7075-T6511 and Anodized Class 2 Type II.

The fixture clamps are made from 17-4 Stainless Steel.

The bridge system is sold complete as shown. *Base unit can be purchased separately if you already own the RWP-024. Please call for details and availability.

Raptor Dovetail Fixtures are made to hold your part on four and five-axis CNC machines. The fixtures provide rigid clamping while exposing five faces of the workpiece. Most features can be completed in a single operation. Our unique Raptor Dovetail spring-loaded clamps require only 1/8" of material to hold the workpiece. That means less waste, easier prep and no distortion. You prepare all your parts with a single dovetail and utilize the same fixture for every part. Easy, strong and efficient.

Patented Design. Patent US8,672,310 B2

Download .750" Dovetail Prep Drawing (pdf)
Dovetail Prep Troubleshooting (pdf)
Proper Dovetail Geometry (pdf)

  • Fixtures must be bolted down firmly to your Pallet or Table using the screws provided.
  • Do not alter or replace any screw, spring or clamp with anything other than the exact item provided.
  • Clamps must be tightened between 120 and 175 inch pounds of torque. DO NOT EXCEED 175 Inch Pounds. While for most applications tightening can be accomplished simply by using the T-Handle wrench provided, it is always recommended that a torque wrench be used until you establish the proper torque pressure for your application. Depending on the size of your workpiece and the material being cut you may need to adjust your clamping pressure. It is never recommended to under or over torque the clamps as this will lead to clamp or fixture failure.
  • When machining your workpiece with the dovetail it is critical that you follow our sketches. Failure to do so may result in the workpiece coming loose and or damage to your fixture. Pay close attention to required sizes and radius requirements on the sketches.
  • Failure to follow these instructions may result in injury or damage to your workpiece, tools, fixtures and/or machine.

Qty of two Raptor RWP-024 dovetail fixtures
Qty of one Raptor RWP-220-2X Raptor Bridge
Qty of two Shoulder Bolts

Simple Social Media Stream: There is no feed data to display!

Watch Raptor Workholding on Titans of CNC

Season 3 available to view on: