Additional Images
Click to Enlarge
rwp-401-11-dovetail-fixture-large
rwp-401-11-key-dimensions5
1.5-prep61

RWP-401-11

Aluminum 1.5"
Rail Dovetail Fixture
Variant price modifier:
Sales price $3,048.38
Raptor products are available only through local distributors. To locate your local Distributor click on the "Buy Raptor Products" tab.

Find a Raptor Distributor
In Stock

Dovetail Width 1.5in
Dovetail Height .125in
Max Workpiece Weight 120  Pounds
Max Workpiece Width 7.00 In
Max Workpiece Length 17.00 In
Max Workpiece Height 12.00 In
Fixture Material Aluminum
Number of Clamps 6 Clamps
Clamp Part Number RWP-CL301SQ
Fixture Height 3in

Description
Instructions & Guidelines
Basic Dimensions
Included
Related Products

The RWP-401-11 is a dovetail fixture for Five Axis and Horizontal milling applications. It offers superior clamping strength and good access to five sides of the workpiece.  The RWP-401-11 utilizes a 1.5" dovetail width x .125” high. This particular rail is 11” long with six clamps, however, custom fixture lengths and various clamp configurations (more or less clamps) can easily be produced per your specifications.

This fixture is manufactured from 7075-T6511 aluminum and anodized: Class 2 Type II.

The fixture clamps are made from 17-4 Stainless Steel.

Raptor Dovetail Fixtures are made to hold your part on Five Axis and Horizontal milling CNC machines. The fixtures provide rigid clamping while exposing five faces of the workpiece. Most features can be completed in a single operation. Our unique Raptor Dovetail spring-loaded clamps require only .125" of material to hold the workpiece. That means less waste, easier prep and no distortion. You prepare all your parts with a single dovetail and utilize the same fixture for every part. Easy, strong and efficient.

This fixture is versatile. It can be used to hold multiple smaller workpieces or one large workpiece. Typically for larger workpiece sizes would be from 9.5" x 2.65" x 0.50" to 17.0" x 7.0" x 12.0".

Patented Design. Patent US8,672,310 B2

Download 1.5" Dovetail Prep Drawing (pdf)
Dovetail Prep Troubleshooting (pdf)
Proper Dovetail Geometry (pdf)

  • Fixtures must be bolted down firmly to your Pallet or Table using the screws provided.
  • Do not alter or replace any screw, spring or clamp with anything other than the exact item provided.
  • Clamps must be tightened between 120 and 175 inch pounds of torque. DO NOT EXCEED 175 Inch Pounds. While for most applications tightening can be accomplished simply by using the T-Handle wrench provided, it is always recommended that a torque wrench be used until you establish the proper torque pressure for your application. Depending on the size of your workpiece and the material being cut you may need to adjust your clamping pressure. It is never recommended to under or over torque the clamps as this will lead to clamp or fixture failure.
  • When machining your workpiece with the dovetail it is critical that you follow our sketches. Failure to do so may result in the workpiece coming loose and or damage to your fixture. Pay close attention to required sizes and radius requirements on the sketches.
  • Failure to follow these instructions may result in injury or damage to your workpiece, tools, fixtures and/or machine.

Qty of three 1/2-13 x 1.0 Socket head cap screws
Qty of two 1/2 x 1.0 Dowel Pin

Simple Social Media Stream: There is no feed data to display!

Watch Raptor Workholding on Titans of CNC

Season 3 available to view on: