Additional Images
Click to Enlarge
rwp-036ss-detail2
rwp-036ss-key-dimensions
1.5-prep69

RWP-036SS

Stainless Steel 1.5"
Dovetail Fixture
3.937" Dia. BC
Variant price modifier:
Sales price $1,523.75
Raptor products are available only through local distributors. To locate your local Distributor click on the "Buy Raptor Products" tab.

Find a Raptor Distributor
In Stock

Dovetail Width 1.5in
Dovetail Height .125in
Fixture Material Stainless Steel
Number of Clamps 2 Clamps
Clamp Part Number RWP-CL302SQ
Fixture Height 2in

Description
Instructions & Guidelines
Basic Dimensions
Related Products
This fixture has the KME 135mm pallet interface, for mounting directly with the following KME products:
5 Axis Tombstones:
KME-TS300-2.0 300mm
KME-TS400-4.0 400mm
KME-TS500-4.0 500mm

kmecnc.com: 5-axis-tombstones

5 Axis Trunnions:
KME-TR100
KME-TR200
KME-TR300

kmecnc.com: 5-axis-trunnions


It offers superior clamping strength while allowing access to five sides of the workpiece.

The RWP-036SS is manufactured from 17-4 Stainless Steel Heat Treated to H-1150.
The fixture clamps are made from 17-4 Stainless Steel.

Raptor Dovetail Fixtures are made to hold your part on four and five-axis CNC machines. The fixtures provide rigid clamping while exposing five faces of the workpiece-- Most features can be completed in a single operation. Our unique Raptor Dovetail spring-loaded clamps require only 1/8" of material to hold the workpiece. That means less waste, easier prep and no distortion. You prepare all your parts with a single dovetail and utilize the same fixture for every part. Easy, strong and efficient.

Patented Design. Patent US8,672,310 B2

HAVE AN EDM APPLICATION?

Use Raptor's Stainless Steel Dovetail Fixtures

Our stainless steel fixtures and clamps are made from 17-4 stainless steel; Heat Treat: H-1150 / Rockwell Hardness Approximate 28.

One-Step Setup

Switch from a standard application to an EDM application in a single step: Simply substitute the clamping system socket head cap screws from alloy steel to stainless steel.


Download 1.5" Dovetail Prep Drawing (pdf)
Dovetail Prep Troubleshooting (pdf)
Proper Dovetail Geometry (pdf)

  • Fixtures must be bolted down firmly to your Pallet or Table using the screws provided.
  • Do not alter or replace any screw, spring or clamp with anything other than the exact item provided.
  • Clamps must be tightened between 120 and 175 inch pounds of torque. DO NOT EXCEED 175 Inch Pounds.While for most applications tightening can be accomplished simply by using the T-Handle wrench provided, it is always recommended that a torque wrench be used until you establish the proper torque pressure for your application. Depending on the size of your workpiece and the material being cut you may need to adjust your clamping pressure. It is never recommended to under or over torque the clamps as this will lead to clamp or fixture failure.
  • When machining your workpiece with the dovetail it is critical that you follow our sketches. Failure to do so may result in the workpiece coming loose and or damage to your fixture. Pay close attention to required sizes and radius requirements on the sketches.
  • Failure to follow these instructions may result in injury or damage to your workpiece, tools, fixtures and/or machine.




Here’s to the Stars and the Stripes!
#raptorworkholding #madeintheusa🇺🇸
Natalie Scott and Bob Marinelli going over all things workholding at Haas Demo Day in Tampa, FL!
Photo cred - Steve Drew
#raptorworkholding
Dale Shields is off to a good start at Haas Demo Day in Cleveland!
#raptorworkholding
Stop in today and visit Scott Johnston at Haas Demo Day in Springboro!
#raptorworkholding
And we’re just about through Monday!
#raptorworkholding
Customer testimonial on Piranha Cooling Line:
“Ran air through 1/2” nozzles on a Mitsubishi hobbing machine. The part was cool to touch, air pressure was considerably greater and it completely evacuated the chips which eliminated the chip welding.”
We have ...
Save time, save money with Raptor!
Raptor Dovetail Fixture RWP-001SS
www.raptorworkholding.com
#repost #raptorworkholding #makingchips720 #workholdingsolutions #cnc #machinist #madeinamerica #madeintheusa🇺🇸
The Raptor Picatinney Rail Fixture fits any of our Raptor .75” fixtures, conforms to the picatinney spec, and has a complete clamping bar to provide more accurate location and stability to the part in the fixture.
#raptorworkholding #workholdingsolutions #makingchips720 #5axis ...
Wishing you a safe and beautiful Memorial Day weekend! 🇺🇸
#raptorworkholding
@cncappsjames stumbled upon one of our posts this week of the RWP-013’s and so kindly shared a pic of his own. We love seeing our customers proud of their Raptor products!
#repost #raptorworkholding #workholdingsolutions #cnc #machinist #makingchips720 #5axis #5axismachining #madeinamerica ...
The Piranha Zero Point Vise System is unique in the market by offering 2 different types of vise systems. The Snapper vise utilizes serrated jaws with 3mm of clamping depth and 8,000 lbs of clamping force used for holding castings. ...
Raptor Dovetail Fixtures range in size from .25” to 2.75.” Shown here is our RWP-013, 1.5” Fixture.
Check our site for all options:
https://www.raptorworkholding.com/5-axis-fixtures
#repost #raptorworkholding #makingchips720 #cnc #5axis #workholding #workholdingsolutions #machinist #madeinamerica #madeintheusa🇺🇸
Pretty cool part @starhagenaerospace
Thanks for sharing!
Raptor Dovetail Fixture RWP-001SS
#raptorworkholding #5axismachining #5axis #makingchips720 #workholdingsolutions
One last delicious meal in New England to celebrate our week at Eastec! It’s been a successful and fun trip. Back home to good old Ohio tomorrow!
#eastec2019 #raptorworkholding
Day 1 of Eastec!
Stop and see us - Booth # 5463!
#raptorworkholding #eastec #eastec2019
Some delicious German food at The Student Prince for dinner tonight. Getting ready for Eastec tomorrow!
How’s this for efficiency?!
Four parts are being machined with one set up using Raptor’s multi-fixture, RWP-019-4X45T. This pyramid will mount to the following Dovetail Fixtures: RWP-001(SS), RWP-004, RWP-013(SS), RWP-026
www.raptorworkholding.com
Thanks for the shout out @brappinbrian!
#repost #raptorworkholding #makingchips720 ...
Stop and see us st Eastec next week! Booth #5463
Discover all things Raptor, Piranha, and TE-CO!
#workholdingsolutions
#raptorworkholding
#piranhaclamp
#piranhacooling
#makingchips720 #cnc #machinist #5axis #5axismachining
Happy Teacher Appreciation Week!
#raptorworkholding
How many hours is your spindle turning? Raptor can help you achieve around the clock manufacturing. Check our site for all available Dovetail Fixtures and Cutters, Adapters and Risers.
www.raptorworkholding.com
#5axismachining #raptorworkholding #makingchips720 #5axis #workholdingsolutions #madeintheusa #machinist #cnc
VMR1 Competition Racing - Raptor Working Holding Thanks to having amazing customers! Our buddies at WMR Competition Performance put together this video for us. Thank you for your support guys. Having great customers like you is what keeps us motivated! Check out their links below.
www.WMR1.com
Instagram: ...
Raptor Pinch Block Check out how to use Raptor's Pinch blocks for a quick workholding solution for secondary and final operations. 5 axis workholding - Soft jaws for your Dovetail fixtures.
http://raptorworkholding.com/5-axis-fixtures/pinch-blocks
5-AXIS SELF CENTERING VISE - RAPTOR Hey guys!
We're looking forward to seeing you at IMTS 2016! Come check out our brand new, interchangeable jaw, 5-axis self centering vise. Booth W-1556.
WIN A DOVETAIL FIXTURE: JUNE CONTEST '16 Hi Everyone! If you're not already following us on Instagram or Facebook please do for a chance to win a FREE RAPTOR DOVETAIL FIXTURE! All you need to do is post and share a photo of your parts running on ...
Getting The Most From Your 5 Axis - Multi-Fixtures Awesome video by Tim Paul of Autodesk, Inc. using Raptor's multi-fixture nest RWP-003-4X in the MX-520.
PRODUCTS:
Adapter Plate/ Riser: RWP-234 (Direct connect to the 300mm pallet)
Multi Fixture: RWP-003-4X
LINKS:
http://raptorworkholding.com/view/productdetails/virtuemart_product_id/96/virtuemart_category_id/7.html
http://raptorworkholding.com/rwp-003-4x.html
http://www.autodesk.com/
How to use Raptor Workholding - Training: 1 This video was created for training purposes on Raptor Workholding products.
For questions please feel free to contact
Sarah Selva: National Sales Manager
Sarah@RaptorWorkholding.com
(818) 841-1785
Workholding Tips for your Haas Indexer COMING SOON: Watch as Hauck Engineering uses Raptor's brand new adapter to do some aggressive 4 axis machining. This new adapter is a direct mount to your HA5C allowing you to attach it right onto your indexer and get to ...
Raptor Workholding Products See how Raptor's Dovetail fixtures work on our new video!

Load More

Here’s to the Stars and the Stripes!
#raptorworkholding #madeintheusa🇺🇸
Natalie Scott and Bob Marinelli going over all things workholding at Haas Demo Day in Tampa, FL!
Photo cred - Steve Drew
#raptorworkholding
Dale Shields is off to a good start at Haas Demo Day in Cleveland!
#raptorworkholding
Stop in today and visit Scott Johnston at Haas Demo Day in Springboro!
#raptorworkholding
And we’re just about through Monday!
#raptorworkholding
Customer testimonial on Piranha Cooling Line:
“Ran air through 1/2” nozzles on a Mitsubishi hobbing machine. The part was cool to touch, air pressure was considerably greater and it completely evacuated the chips which eliminated the chip welding.”
We have ...
Save time, save money with Raptor!
Raptor Dovetail Fixture RWP-001SS
www.raptorworkholding.com
#repost #raptorworkholding #makingchips720 #workholdingsolutions #cnc #machinist #madeinamerica #madeintheusa🇺🇸
VMR1 Competition Racing - Raptor Working Holding Thanks to having amazing customers! Our buddies at WMR Competition Performance put together this video for us. Thank you for your support guys. Having great customers like you is what keeps us motivated! Check out their links below.
www.WMR1.com
Instagram: ...
Raptor Pinch Block Check out how to use Raptor's Pinch blocks for a quick workholding solution for secondary and final operations. 5 axis workholding - Soft jaws for your Dovetail fixtures.
http://raptorworkholding.com/5-axis-fixtures/pinch-blocks

Load More

Watch Raptor Workholding on Titans of CNC

Season 3 available to view on: