Additional Images
Click to Enlarge


Aluminum 1.5"
Dovetail Fixture
2.362" Dia. BC
Variant price modifier:
Sales price $762.14
Raptor products are available only through local distributors. To locate your local Distributor click on the "Buy Raptor Products" tab.

Find a Raptor Distributor
In Stock

Dovetail Width 1.5in
Dovetail Height .125in
Max Workpiece Weight 20  Pounds
Max Workpiece Width 6.00 In
Max Workpiece Length 6.00 In
Max Workpiece Height 6.00 In
Fixture Material Aluminum
Number of Clamps 2 Clamps
Clamp Part Number RWP-CL301SQ
Fixture Height 2in

Instructions & Guidelines
Basic Dimensions
Related Products

1.5" Aluminum Dovetail Fixture. Base 3" diameter and 2" height (not including the boss/plug area), with 4 mounting holes. Made specifically for the Yukiwa TNT-130L but it is adaptable to fit on many small rotary tables and lathes with a sub-plate. Bolt hole 60mm for an 8mm diameter bolt pattern.

The standard RWP-027 is manufactured from 7075-T6511 aluminum and anodized: Class 2 Type II. Custom materials can be special-ordered.

The fixture clamps are made from 17-4 Stainless Steel.

Raptor Dovetail Fixtures are made to hold your part on four and five-axis CNC machines. The fixtures provide rigid clamping while exposing five faces of the workpiece. Most features can be completed in a single operation. Our unique Raptor Dovetail spring-loaded clamps require only 1/8" of material to hold the workpiece. That means less waste, easier prep and no distortion. You prepare all your parts with a single dovetail and utilize the same fixture for every part. Easy, strong and efficient.

* Typical workpiece size dimensions (L x W x H): From: 2.35" x 2.25" x 0.50" To: 6.0" x 6.0" x 6.0"

Patented Design. Patent US8,672,310 B2

Download 1.5" Dovetail Prep Drawing (pdf)
Dovetail Prep Troubleshooting (pdf)
Proper Dovetail Geometry (pdf)

  • Fixtures must be bolted down firmly to your Pallet or Table using the screws provided.
  • Do not alter or replace any screw, spring or clamp with anything other than the exact item provided.
  • Clamps must be tightened between 120 and 175 inch pounds of torque. DO NOT EXCEED 175 Inch Pounds. While for most applications tightening can be accomplished simply by using the T-Handle wrench provided, it is always recommended that a torque wrench be used until you establish the proper torque pressure for your application. Depending on the size of your workpiece and the material being cut you may need to adjust your clamping pressure. It is never recommended to under or over torque the clamps as this will lead to clamp or fixture failure.
  • When machining your workpiece with the dovetail it is critical that you follow our sketches. Failure to do so may result in the workpiece coming loose and or damage to your fixture. Pay close attention to required sizes and radius requirements on the sketches.
  • Failure to follow these instructions may result in injury or damage to your workpiece, tools, fixtures and/or machine.

Included with this fixture:

Qty of four Socket hard cap screws

Qty of one RWP-Plug-027 Plug
Qty of one Screw for plug

Simple Social Media Stream: There is no feed data to display!

Watch Raptor Workholding on Titans of CNC

Season 3 available to view on: