Additional Images
Click to Enlarge
rwp030-dovetail-fixture-large
rwp-030ss-key-dimensions4
75-prep765
0.75-modular-configuration6
223-adapter-config-options53

RWP-030SS

Stainless Steel 0.75"
Dovetail Fixture
3.8" Dia. BC
Variant price modifier:
Sales price $1,950.40
Raptor products are available only through local distributors. To locate your local Distributor click on the "Buy Raptor Products" tab.

Find a Raptor Distributor
out of stock

Dovetail Width 0.750in
Dovetail Height .125in
Max Workpiece Weight 40  Pounds
Max Workpiece Width 7.50 In
Max Workpiece Length 7.50 In
Max Workpiece Height 7.50 In
Fixture Material Stainless Steel
Number of Clamps 3 Clamps
Clamp Part Number RWP-CL302SQ
Fixture Height 3in

Description
Instructions & Guidelines
Basic Dimensions
Included
Related Products
This 0.75" dovetail fixture is utilized for milling applications. This product design, with three clamps, provides versatility to either machine one long workpiece or three smaller workpieces. It offers superior clamping strength while allowing access to five sides of the workpiece.

The standard RWP-030SS is manufactured from 17-4 Stainless Steel.

The fixture clamps are made from 17-4 Stainless Steel.

Raptor Dovetail Fixtures are made to hold your part on four and five-axis CNC machines. The fixtures provide rigid clamping while exposing five faces of the workpiece - Most features can be completed in a single operation. Our unique Raptor Dovetail spring-loaded clamps require only 1/8" of material to hold the workpiece. That means less waste, easier prep and no distortion. You prepare all your parts with a single dovetail and utilize the same fixture for every part. Easy, strong and efficient.

* Typical workpiece size dimensions (L x W x H): From: 5.0" x 1.75" x 0.50" To: 7.50" x 7.50" x 7.50"

Patented Design. Patent US8,672,310 B2

HAVE AN EDM APPLICATION?

Use Raptor's Stainless Steel Dovetail Fixtures

Our stainless steel fixtures and clamps are made from 17-4 stainless steel; Heat Treat: H-1150 / Rockwell Hardness Approximate 28.

One-Step Setup

Switch from a standard application to an EDM application in a single step: Simply substitute the clamping system socket head cap screws from alloy steel to stainless steel.

Download 0.75" Dovetail Prep Drawing (pdf)
Dovetail Prep Troubleshooting (pdf)
Proper Dovetail Geometry (pdf)

  • Fixtures must be bolted down firmly to your Pallet or Table using the screws provided.
  • Do not alter or replace any screw, spring or clamp with anything other than the exact item provided.
  • Clamps must be tightened between 120 and 175 inch pounds of torque. DO NOT EXCEED 175 Inch Pounds. While for most applications tightening can be accomplished simply by using the T-Handle wrench provided, it is always recommended that a torque wrench be used until you establish the proper torque pressure for your application. Depending on the size of your workpiece and the material being cut you may need to adjust your clamping pressure. It is never recommended to under or over torque the clamps as this will lead to clamp or fixture failure.
  • When machining your workpiece with the dovetail it is critical that you follow our sketches. Failure to do so may result in the workpiece coming loose and or damage to your fixture. Pay close attention to required sizes and radius requirements on the sketches.
  • Failure to follow these instructions may result in injury or damage to your workpiece, tools, fixtures and/or machine.

Qty of three 1/2-13 x 1.0 Socket head cap screws
Qty of three 1/2 x 1.0 Dowel Pin

Our Sales Engineer Sam Lane conducting virtual product training! Great job Sam!
Shout out to @haas_automation for this 5axis demo video displaying Raptor RWP-002SS and RWP-202!
Friday question of the day!?
Piranha self centering vises! We offer the Gepard in 170MM , 300MM and double station!
Raptor fixture showing the options of 5 axis machining !
RWP-502 vise with an RWP-242-V100 riser plate!
RWP-031SS
Piranha cooling line on display! Look at that awesome setup!
We would like to wish Scott Hodgin in shipping a Happy 60th Birthday!!
See what all Piranha has to offer!!
•zero point plates
•self centering vises
•various jaw options
•coolant line
Call us for more information!
800-543-4071!
RWP-1056
Straight Edge 60 degree Dovetail
•Comparable with the RWP-502 vise
•Utilizes dovetail for secure clamping and retention
•dovetail can be modified to fit various workpiece sizes
•utilizes standard 60 degree form, can be cut with any 60 degree cutter
...

Load More

Watch Raptor Workholding on Titans of CNC

Season 3 available to view on: