Additional Images
Click to Enlarge
rwp012ss-dovetail-fixture-large
rwp-012-key-dimensions64
75-prep89
1.5-modular-configuration3

RWP-012SS

Stainless Steel 0.75"
Dovetail Fixture
with 1.5" Dovetail Base
Variant price modifier:
Sales price $975.41
Raptor products are available only through local distributors. To locate your local Distributor click on the "Buy Raptor Products" tab.

Find a Raptor Distributor
In Stock

Dovetail Width 0.750in
Dovetail Height .125in
Max Workpiece Weight 7  Pounds
Max Workpiece Width 3.75 In
Max Workpiece Length 3.75 In
Max Workpiece Height 3.75 In
Fixture Material Stainless Steel
Number of Clamps 1 Clamp
Clamp Part Number RWP-CL302SQ
Fixture Height 2in

Description
Instructions & Guidelines
Basic Dimensions
Related Products

The RWP-012SS is a 0.75" wide dovetail fixture for milling applications.The RWP-012SS is designed to connect directly to the following 1.5" dovetail fixtures: RWP-001, RWP-001SS, RWP-004, RWP-013, RWP-013SS. This allows you to quickly machine smaller size parts without taking your primary fixtures off of the machine.

The RWP-012SS is manufactured from 17-4 Heat Treated Stainless Steel.

The fixture clamp is made from 17-4 Stainless Steel.

Raptor Dovetail Fixtures are made to hold your part on four and five-axis CNC machines. The fixtures provide rigid clamping while exposing five faces of the workpiece. Most features can be completed in a single operation. Our unique Raptor Dovetail spring-loaded clamps require only 1/8" of material to hold the workpiece. That means less waste, easier prep and no distortion. You prepare all your parts with a single dovetail and utilize the same fixture for every part. Easy, strong and efficient.

* Typical workpiece size dimensions (L x W x H): From: 1.26" x 1.3" x 0.50" To: 3.75" x 3.75" x 3.75"

Patented Design. Patent US8,672,310 B2

HAVE AN EDM APPLICATION?

Use Raptor's Stainless Steel Dovetail Fixtures

Our stainless steel fixtures and clamps are made from 17-4 stainless steel; Heat Treat: H-1150 / Rockwell Hardness Approximate 28.

One-Step Setup

Switch from a standard application to an EDM application in a single step: Simply substitute the clamping system socket head cap screws from alloy steel to stainless steel.

Download 0.75" Dovetail Prep Drawing (pdf)
Dovetail Prep Troubleshooting (pdf)
Proper Dovetail Geometry (pdf)

  • Fixtures must be bolted down firmly to your Pallet or Table using the screws provided.
  • Do not alter or replace any screw, spring or clamp with anything other than the exact item provided.
  • Clamps must be tightened between 120 and 175 inch pounds of torque. DO NOT EXCEED 175 Inch Pounds. While for most applications tightening can be accomplished simply by using the T-Handle wrench provided, it is always recommended that a torque wrench be used until you establish the proper torque pressure for your application. Depending on the size of your workpiece and the material being cut you may need to adjust your clamping pressure. It is never recommended to under or over torque the clamps as this will lead to clamp or fixture failure.
  • When machining your workpiece with the dovetail it is critical that you follow our sketches. Failure to do so may result in the workpiece coming loose and or damage to your fixture. Pay close attention to required sizes and radius requirements on the sketches.
  • Failure to follow these instructions may result in injury or damage to your workpiece, tools, fixtures and/or machine.

Piranha coolant kits! We offer them in 1/4, 1/2, and 1/8 inch sizes! We also have individual components available to suite your needs! Call us today! 800-543-4071
Shout out to @7cedars.design for the awesome video and picture of our Raptor products in action!
Getting setup for our weekly product training.
Piranha coolant pressure and flexibility are key differentiators vs the completion..
Preparing for another Piranha coolant line webinar today..
Piranha coolant line, sneak peak of what we will be showing for our webinar tomorrow!..
Piranha clamps, part of the Teco family of products provides open bed construction allowing chips and fluids to drain out of the clamp easily keeping the changeover and cleanup time to minimum. Jaws available in aluminum and stainless steel. Combine ...
Raptor challenge: Two key components workholding devices provide are 1) machine up time “spindle running” and 2) change over time.. How many machine hours are you getting in 1 day (24 hours) and how many changeovers are you making?
Piranha webinar highlights from today! Great job Scott..
Piranha offering, 5 plate options, risers, numerous self centering vises and most importantly the locating stud that allows plate versatility..
Putting final touches in place for our Piranha product webinar today!
Check out this lineup.. Piranha clamps and vises combined with the ability to use a zero point plate making the them interchangeable! Webinar being offered this week that can provide more details.

Load More

Watch Raptor Workholding on Titans of CNC

Season 3 available to view on: